Davco Ultra Epoxy Tile Grout
Davco Ultra Epoxy Tile Grout is a 100% solid epoxy grout with very high performance. It offers maximum protection against staining and chemical damage. It is suitable for immersed water areas.
- High performance 2 components 100% solid
epoxy grout. - For tile gap between 1 - 15 mm.
- Excellent bonding strength, can be used for tiling.
- Excellent resistance to chemical, black mold and stain.
- Suitable for fully immersed area such as swimming
pool, fish pond, fountain and spa. - Suitable for high hygienic installations such as
hospitals, factory, veterinary clinic, commercial
kitchen and laboratories. - Easy to apply and easy to clean up.
- 3 colors available.
Usage
Wall/ floor, Interior/ exterior.- Clinical sanitation.
- Commercial kitchens
- Hospitals.
- Commercial food processing plants.
- Laboratories.
- Industrial.
- Swimming pool.
- Spas.
- Steam rooms.
- Car wash.
Advantages
- High performance 2 components 100% solid
epoxy grout. - For tile gap between 1 - 15 mm.
- Excellent bonding strength, can be used for tiling.
- Excellent resistance to chemical, black mold and stain.
- Suitable for fully immersed area such as swimming
pool, fish pond, fountain and spa. - Suitable for high hygienic installations such as
hospitals, factory, veterinary clinic, commercial
kitchen and laboratories. - Easy to apply and easy to clean up.
- 3 colors available.
Packaging
4 kg set (A+B), 6 sets per box (24 kgs)
Colour
White, Slate grey and Black
Product Details
APPROVALS / CERTIFICATES
Pass and comply with ANSI 118.3 - 1999 (reaffirmed 2005) standard
Composition
Epoxy resin
Shelf life
12 months from date of production if stored in undamaged and unopened, original sealed packaging
Storage conditions
Store in dry conditions and protected from direct sunlight.
Compressive strength
> 25 N /mm2 at 7 days (refer to ANSI 118.3)
Shrinkage
≤ 0.25% at 7 days (refer to ANSI 118.3)
Chemical resistance
List of Chemical Resistance
√ = Good resistance x = Not recommened
(Acid Group)
CHEMICAL | CONCENTRATION (%) | LAB RESULT |
Acetic acid | 2.50% | √ |
Acetic acid | 5% | √ |
Acetic acid | 10% | x |
Hydrochloric acid | 37% | √ |
Chromic acid | 20% | x |
Citric acid | 10% | √ |
Formic acid | 2.50% | √ |
Formic acid | 10% | x |
Lactic acid | 2.50% | √ |
Lactic acid | 5% | √ |
Lactic acid | 10% | √ |
Nitric acid | 25% | √ |
Nitric acid | 50% | x |
Pure oleic acid | - | x |
Phosphoric acid | 50% | √ |
Phosphoric acid | 75% | √ |
Sulphuric acid | 1.50% | √ |
Sulphuric acid | 50% | √ |
Sulphuric acid | 96% | x |
Tannic acid | 10% | √ |
Tartaric acid | 10% | √ |
Oxalic acid | 10% | √ |
(Alkaline)
CHEMICAL | ACTIVE CHLORINE CONCENTRATION | LAB RESULT |
Sodium hypochlorite in solution | 6.4 g/l | √ |
Sodium hypochlorite in solution | 162 g/l | x |
(Alkaline)
CHEMICAL | CONCENTRATION (%) | LAB RESULT |
Ammonia in solution | 25% | √ |
Caustic soda | 50% | √ |
Potassium permanganate | 5% | √ |
Potassium permanganate | 10% | √ |
Potassium hydroxide | 50% | √ |
Sodium bisulphite | 10% | √ |
(Oil and fuel)
CHEMICAL | CONCENTRATION (%) | LAB RESULT |
Petrol, fuel | - | √ |
Turpentine | - | √ |
Diesel fuel | - | √ |
Tar oil | - | √ |
Olive oil | - | √ |
Light fuel oil | - | √ |
Petrol | - | √ |
(Solvent)
CHEMICAL | CONCENTRATION (%) | LAB RESULT |
Acetone | - | x |
Ethylene glycol | - | √ |
Glycerine | - | √ |
Methylene glycol acetate | - | x |
Perchloroethylene | - | x |
Carbon tetrachloride | - | √ |
Ethyl alcohol | - | √ |
Trichloroethylene | - | x |
Chloroform | - | x |
Methylene chloride | - | x |
Tetrahydrofurane | - | x |
Toluene | - | x |
Carbon sulphide | - | √ |
White spirit | - | √ |
Benzene | - | x |
Trichloroethane | - | x |
Xylene | - | x |
Mercuric chloride (HgCl2) | 5% | √ |
Hydrogen peroxide | 1% | √ |
Hydrogen peroxide | 10% | √ |
Hydrogen peroxide | 25% | √ |
(Saturated solution +20ºc)
CHEMICAL | CONCENTRATION (%) | LAB RESULT |
Sodium hyposulphite | - | √ |
Calcium chloride | - | √ |
Ferric chloride | - | √ |
Sodium chloride | - | √ |
Sodium chromate | - | √ |
Sugar | - | √ |
Aluminium sulphate | - | √ |
Application
Mixing ratio
Component A : Component B = 3 : 1 by weight
Ambient air temperature
min. +10°C to max. +35°C
Open Time
90 minutes (at 20°C)
Waiting time
Epoxy grout can be applied after 24 hours of tiling application.
Wait 24 hours before traffic.
Consumption
2 - 4 sq.m. / 1 kg
The consumption of grout varies depending upon the size and thickness
of tile and the width of tile joint. (unit: kg/m2)
Tile size | Joint width (mm) | Rate of use (kg/m2) |
25 x 25 x 4 | 3.0 | 1.6 |
50 x 50 x 6 | 3.0 5.0 | 1.2 2.0 |
100 x 100 x 6 | 3.0 5.0 7.0 | 0.6 1.0 1.4 |
100 x 100 x 10 | 3.0 5.0 7.0 | 1.0 1.7 2.3 |
200 x 200 x 6 | 3.0 5.0 7.0 | 0.3 0.5 0.7 |
200 x 250 x 6 | 3.0 5.0 7.0 | 0.3 0.5 0.7 |
300 x 300 x 6 | 3.0 5.0 7.0 | 0.2 0.4 0.5 |
400 x 400 x 8 | 3.0 5.0 | 0.2 0.4 |
(roughly 1 inch = 2.5 cm = 25 mm)
Waste will be occured according to actual field performance including
working method, skill and site condition.
MIXING
- Use power drill with mixing paddle on slow speed.
- Stir Part B (hardener) liquid. Then add the entire
content of Part B 1 kg to the Part A 3 kg (resin)
in a container. - Mix Davco Ultra Epoxy Tile Grout part A and B with
power drill until the compound is evenly distributed,
lump-free and thick creamy paste is achieved. - Ensure to scrape bottom and sides of container
during mixing. - Davco Ultra Epoxy Tile Grout should be used within
15-30 minutes after mixing. (depend on working
temperature)
APPLICATION
- Wait 24 hours after tilling to apply grout.
- Use a rubber float to fill the joint in diagonal motion
and carefully remove excess grout sitting on the tile. - Make sure the grout is forced into the joint and not
just sitting on the top. - Clean with a damp sponge.
- Remove surplus material from the face of the tiles
with a dry cloth.
CLEANING OF EQUIPMENT
Remove Davco Ultra Epoxy Tile Grout grout from
tools, equipments and tiles with clean water
immediately after the application.