Product Data Sheet Safety Data Sheet Show all documents

Davco Extra Plus

anti-mold cement based tile grout

Davco Extra Plus is a one pack premixed color grout with polymer modified for grouting gaps from 1 to 6 mm width

  • Good strength, adhesion and crack resistance
  • Water repellent
  • Inhibit the growth of bacteria, mold and bacteria
  • UV resistance
Where to buy Contact Us
Product Data Sheet Safety Data Sheet Show all documents

Usage

  • Grouting the joints for most general types of tiles
  • Application for floor and wall
  • Application for indoor and outdoor
 

Advantages

  • Good strength, adhesion and crack resistance
  • Water repellent
  • Inhibit the growth of bacteria, mold and bacteria
  • UV resistance

Packaging

1 kg bag, 20 bags per box

Colour

21 colors

white, black, smoky white, grey, slate grey, sea shell, corn silk, cream almond, light pink, cream maple, fire brick, golden teak, red maroon, light green, fern leaf, alice blue, morning blue, andaman, sakura, wood and koko

Product Details

Product Information

Shelf life

12 months from date of production if stored properly in undamaged original sealed packaging.

Storage conditions

Store in dry conditions and protected from direct sunlight.

Density

0.85 - 1.0 kg./L
Technical Information

Abrasion resistance

< 2000 mm3

Compressive strength

> 15 MPa

Tensile strength in flexure

> 2.5 MPa (at 28 days)

Shrinkage

< 3 mm/m (at 28 days)

Water absorption

after 30 min.

< 5 g

after 240 min.

< 10 g

 

Application

Application Information

Mixing ratio

0.36-0.38 litres of clean water per 1 kg bag of tile grout.

Ambient air temperature

min. +5°C - max. +35°C

Pot Life

ca.120 min. (at 25°C)

Waiting time

Tile grout can be applied after 24 hours of tiling application.
Wait 24 hours before traffic.
Consumption

Consumption

The consumption of grout varies depending upon the size and thickness of tile and the width of tile joint. (unit: sqm./1kg)
 

Tile size

Thickness

Joint width
1 mm.

Joint width

2 mm.

Joint width
3 mm.

1"x1"

4 mm.

1.8

0.9

0.6

4"x4"

5 mm.

5.9

2.9

2.0

8"x8"

5 mm.

11.8

5.9

3.9

8"x10"5 mm.13.16.54.4
10"x12"5 mm.16.08.05.3
12"x12"10 mm.8.84.42.9

Tile size

Thickness

Joint width

4 mm.

Joint width

5 mm.

Joint width

6 mm.

1"x1"

4 mm.

0.5

0.4

0.3

4"x4"

5 mm.

1.5

1.2

1.0

8"x8"

5 mm.

2.9

2.4

2.0

8"x10"5 mm.3.32.62.2
10"x12"5 mm.4.03.22.7
12"x12"10 mm.2.21.81.5

(roughly 1 inch = 2.5 cm. = 25 mm.)
Application steps

MIXING

Mix a 1 kg. bag with 0.36 - 0.38 litres of clean water until the product is evenly distributed. Leave to stand several minutes. Re-stir before using. Only mix enough grout to cover 2 m2 at a time.

APPLICATION

  • Wait 24 hours after tilling before applying tile grout.
  • Use a rubber float to fill the joint in diagonal motion.
  • Remove excess grout.
  • Make sure the grout is forced into the joint and not just sitting on the top.
  • Quick clean with a damp sponge.
  • Allow 2 hours before cleaning with a dry cloth.
  • Allow 24 hours before traffic.

Documents