Surface Protection and Impregnations

Sikagard®-680 S Betoncolor

Sikagard®-680 S Betoncolor is a one-component solvent containing coating, based on methacrylic resins resistant to weathering, alkalis and ageing. It is available in clear and coloured grades for use on mineral substrates including concrete and other cementitious surfaces.
Sikagard®-680 S Betoncolor protects concrete against aggressive atmospheric influences and promotes a self-cleaning effect on the treated surfaces. It does not adversely influence the characteristic texture of the concrete.
Sikagard®-680 S Betoncolor complies with the requirements of EN 1504-2 as a protective coating.

Sikagard®-700 S

Sikagard®-700 S is a one part water repellent impregnation for absorbent cementitious substrates. It penetrates well into the open pores of the substrate, providing durable water repellency, while still allowing water vapour diffusion in both directions.
Sikagard®-700 S complies with the requirements of EN 1504-2 for hydrophobic Impregnation (penetration depth class I).

Sikagard®-705 L

Sikagard®-705 L is a one-component low viscosity, solvent free, reactive impregnation for concrete and cementitious substrates based on silane with 99% active ingredient. Sikagard®-705 L complies with the highest requirements of EN 1504-2 for hydrophobic Impregnation (penetration depth class II & resistance to freeze and thaw salt stresses).

Sikagard®-715 W

Sikagard®-715 W is a water based moss, lichen and algae removing solution.

SikaTop® Seal-107

2-part, Polymer-Modified, Flexible Cementitious Waterproofing and Protective Slurry Mortar.