Product Data Sheet Safety Data Sheet Show all documents

Sika® Set CC

Set accelerating admixture for concrete products

Sika® Set CC is an admixture that accelerates the early setting times of cement based products for the production of mortars and non – reinforced concrete with increased early strengths.

  • Can be used with all types of Portland cement, including sulphate resistant cement
  • Provides faster setting times
  • Increases early strengths
Product Data Sheet Safety Data Sheet Show all documents

Usage

  • In colder temperatures or climates if earlier setting times are required to enable final finishing to take place
  • In tidal situations where concrete may be subjected to damaging wave action
  • Production of screeds and overlays
  • Pre-cast applications of non – reinforced concrete elements
 

Advantages

  • Can be used with all types of Portland cement, including sulphate resistant cement
  • Provides faster setting times
  • Increases early strengths

Packaging

30 kg / bulk

Colour

Clear liquid

Product Details

Product Information

Shelf life

12 months from the date of production If stored properly in undamaged, original, sealed packaging.

Storage conditions

Store in dry conditions, protected from direct sunlight and frost at temperature between 5°C and 35°C.

Density

1.3 kg/l (at temperature 25°C)

Total Chloride Ion Content

1 litre contains approx. 0.28kg of chloride ions.

Application

Application Information

DISPENSING

  • Sika® Set CC should be added directly with the mixing water at the Ready Mix Plant
  • This product may be added to ready mixed concrete on arrival at the site, however a reduction in added water must be made during batching to compensate for the additional water in the admixture dosage
Consumption

Recommended Dosage

Temperature

Typical - per 100 kg of cement

15°C - 20°C

1.6 litres

10°C - 15°C

3.2 litres

5°C - 10°C4.8 litres

Sika® Set CC is compatible with all types of Portland Cement, including S.R.C. type and Hydraulic Cement.

Documents