Product Data Sheet Safety Data Sheet Show all documents

Sikament® F-1

High Range Water-Reducing Concrete Admixture

Sikament® F-1 is a high-range water reducer (HRWR) type concrete admixture of the new generation for the production of high strength concrete with increased acceleration for early strength development.

Sikament® F-1 provides the following properties:
As superplasticizer:
  • Substantial improvement in workability without increase of w/c ratio
  • No segregation
  • Normal set without retardation
  • Accelerated hardening after setting
  • Improved density and surface finish (no honeycomb)
As high-range water reducer:
  • Greater than 20% water reduction, and increase of the 28 days strength of up to 40% can be achieved
  • Early stength increased of more than 100% can easily be achieved (depending on dosage and w/c ratio)
  • Increased impermeability to water
  • Improved resistance to wear and abrasion
Product Data Sheet Safety Data Sheet Show all documents

Usage

Sikament® F-1 is used as superplasticizer for flowing concrete at:
  • Slabs and Foundations
  • Walls and columns with slender dimensions and packed reinforcements
  • Beams and Ceilings
Sikament® F-1 F1 is used as high-range water reducer at:
  • Pre-casted concreted elements for high quality demands
  • Bridges and cantilevers
  • Pre-stressed structures
 

Advantages

Sikament® F-1 provides the following properties:
As superplasticizer:
  • Substantial improvement in workability without increase of w/c ratio
  • No segregation
  • Normal set without retardation
  • Accelerated hardening after setting
  • Improved density and surface finish (no honeycomb)
As high-range water reducer:
  • Greater than 20% water reduction, and increase of the 28 days strength of up to 40% can be achieved
  • Early stength increased of more than 100% can easily be achieved (depending on dosage and w/c ratio)
  • Increased impermeability to water
  • Improved resistance to wear and abrasion

Packaging

200 L/drum
1,000 L /tote or bulk

Colour

Brown Liquid

Product Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

Complies with ASTM C-494 - 81 Type F
Product Information

Composition

Blended Polymer

Shelf life

12 months from the date of production If stored properly in undamaged, original, sealed packaging.

Storage conditions

Store in dry conditions, protected from direct sunlight at temperature between 5°C and 40°C.

Density

1.150 - 1.170 kg/L (at 25°C)

pH-Value

5.5 - 7.5 Approx.

 

Application

Application Information

Compatibility

Sikament® F-1 is compatible with all types of Portland Cement, including S.R.C. type and Hydraulic Cement.

Dispensing

Sikament® F-1 can be added separately to the freshly mixed concrete, or directly to the gauging water prior its addition to the dry mix. When added separately to the mix, a further mixing of at least one minute should take place. It is typical that a later addition of superplasticizer to the concrete would improve the workability retention.

Restrictions

Concrete shall be designed in accordance with ACI 211.1-89 standard recommended practise for selecting proportions for concrete and shall
contain the superplasticizer which shall be Sikament® F-1 as manufactured by Sika. It shall be used in strict accordance to the manufacture's
recommendations.
Consumption

Recommended Dosage

Sikament® F-1 is dosed at normal rate of 600 - 2,500 CC. per 100 kg. of cement weight.The exact dosage depends upon the effect required and should be established from laboratory trials.

Documents