Product Data Sheet Safety Data Sheet Show all documents

Sikament® RB 1068

Superplaticising admixture to produce low slump loss rheoplastic concrete

Sikament® RB 1068 is a ready to use, liquid admixture designed to produce high slump concrete with low water/cement ratio. Sikament® RB 1068 is a chloride free and is specially formulated to impart rheoplastic qualities to concrete. Rheoplastic concrete is defned as a fluid concrete with a slump value of ≥200 mm that flows easily but at the same time is free from segregation. Sikament® RB 1068 contains no added chloride.

• High workability for shorter placement time. Saves time and labour 
• High water reduction to produce high impermeability and strength leading to improves durability  
• Superior cohesion with no segregation even at high workability. Excellent concrete quality  
• High early strength for early de-moulding 
• Low shrinkage and creep for better dimensional stability  
Product Data Sheet Safety Data Sheet Show all documents

Usage

• All types of concrete where high strength and workability are required. 
• Improving pumped concrete and conventionally placed concrete
• Mass-concrete
• Ready-mixed concrete
• Hot weather concrete  

Advantages

• High workability for shorter placement time. Saves time and labour 
• High water reduction to produce high impermeability and strength leading to improves durability  
• Superior cohesion with no segregation even at high workability. Excellent concrete quality  
• High early strength for early de-moulding 
• Low shrinkage and creep for better dimensional stability  

Packaging

200 L / drum, 1,000 L / tote

Colour

Brown Liquid

Product Details

Sustainability / Certifications / Approvals

CERTIFICATES AND TEST REPORTS

Complies with ASTM C 494 Type F and G, BS5075 Part 3 and UNI no. 7102,7104-72 and 8145 for high range water-reducing admixtures
Product Information

Composition

Modified Napthalene Sulfonate

Shelf life

12 months from the date of production If stored properly in undamaged, original, sealed packaging

Storage conditions

Store in dry conditions, protected from direct sunlight at temperature between 5°C and 40°C

Density

1.220 - 1.260 KG/L @ 25°C

pH-Value

5.0 - 8.0 @ 25°C

 

Application

Application Information

Compatibility

Sikament® RB 1068 may be combined with many other Sika products. Trials must always be carried out before combining products in specific mixes. Contact Sika Technical Services for additional information and any specific combinations. 
Sikament® RB 1068 is compatible with all types of Portland Cement, including SRC type and Hydraulic Cement.

Dispensing

The addition of Sikament® RB 1068 into a dry mix is not recommended. Sikament® RB 1068 can be dosed either at the batching plant or on-site. Introduce Sikament® RB 1068 at the specified dosage directly into the mixer through a dispenser along with mixing water, when the concrete is thoroughly wetted (i.e. after adding at least 75% of the mixing water) and mix for at least 2 minutes. For on-site dosing, mix for at least 2 minutes after the addition. 
Consumption

Recommended dosage

Dosage of Sikament® RB 1068 depends upon the mix design, the ambient conditions and the degree of water reduction and workability required. Typical dosage used is 0.6 – 2.0 liters per 100 kg of cementitious materials. Other dosages may also be used depending on the mix design and ambient conditions.Therefore, in many cases it is advisable to carry out trial mixes.

Documents