Product Data Sheet Safety Data Sheet Show all documents

Sika® Plastomix® -704

Mid-range Water Reducing Concrete Admixture

Sika® Plastomix® -704 is a newly developed admixture for concrete with mid-range reducing effect. It is concentrated solution based on Synthetic Polymer and additives.

  • Water reduction up to 15% against control mix
  • Improved utilization of cement
  • Equal strengths to control mix with less cement
  • Better improvement for final strength
  • Compensates for slow early strength gain achieved by cement replacements (PFA,GGBFS)
  • Increased workability and placeability
  • Longer slump retention
Sika® Plastomix® -704
Product Data Sheet Safety Data Sheet Show all documents

Usage

  • Cost effectiveness required for conventional concrete
  • Where increased workability is required
  • Use in mixes where cement saving is required
  • Especially suitable for concrete containing cement
    replacements such as PFA (fly ash) or GGBFS (slag)
 

Advantages

  • Water reduction up to 15% against control mix
  • Improved utilization of cement
  • Equal strengths to control mix with less cement
  • Better improvement for final strength
  • Compensates for slow early strength gain achieved by cement replacements (PFA,GGBFS)
  • Increased workability and placeability
  • Longer slump retention

Packaging

200 L/drum
1,000 L/tote or bulk

Colour

Light Brown Liquid

Product Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

  • Complies with ASTM C494 Type A&D
  • Complies with TIS 733-2530
Product Information

Shelf life

12 months from the date of production If stored properly in undamaged, original, sealed packaging.

Storage conditions

Store in dry conditions, protected from direct sunlight at temperature between 5°C and 40°C.

Density

1.060 - 1.100 kg/L (at temperature 25°C)

Conventional dry material content

19.0-21.0%

pH-Value

8.0 - 10.0 Approx.

Total chloride ion content

≤ 0.2%

 

Application

Application Information

Dispensing

Add the correct amount of Sika® Plastomix® -704 at the concrete plant. Addition should be by automatic dispenser into the water line at the batching plant. Do not add directly on to the dry sand or cement.

Compatibility

Sika® Plastomix® -704 is compatible with all types of Portland Cement, including S.R.C. type and Hydraulic Cement.
Consumption

Recommended dosage

300 - 800 CC. per 100 kg. of cement or cementitious weight. Actual dosage depends on requirements and should be established from laboratory trials.

Documents