Product Data Sheet Safety Data Sheet Show all documents

SikaPlast®-204 TH

PCE BASED SUPERPLASTICING AND SET RETARDING CONCRETE ADMIXTURE

SikaPlast®-204 TH is a third generation polymer based high performance superplasticizer for producing soft consistency concrete.

SikaPlast®-204 TH combines diffent modes of actions. By adsorption on the surface of the fines and keeping them apart while the hydration is in progress.
SikaPlast®-204 TH effects the following concrete properties :
  • Long slump keeping and high water reduction
  • High flowability (considerably reduced placing and compacting work)
  • Faster evolution of early strength development
  • Workability can be maintained up to 4 hours (still depends on admixture dosage, cement type, temperature, W/C)
  • Improved creep resistance and shrinkage resistance characteristics
SikaPlast®-204 TH contains neither chlorides nor other corrosion-inducing subsances and can therefore be used without any restrictions for reinforced concrete structures.
Product Data Sheet Safety Data Sheet Show all documents

Usage

SikaPlast®-204 TH is mainly suitable for the manufacture of concrete for RMC plants and site batch concrete SikaPlast®-204 TH is used for the following types of concrete :
  • High strength bored piles
  • Bridges and cantiliever
  • Slender components with dense reinforcement
 

Advantages

SikaPlast®-204 TH combines diffent modes of actions. By adsorption on the surface of the fines and keeping them apart while the hydration is in progress.
SikaPlast®-204 TH effects the following concrete properties :
  • Long slump keeping and high water reduction
  • High flowability (considerably reduced placing and compacting work)
  • Faster evolution of early strength development
  • Workability can be maintained up to 4 hours (still depends on admixture dosage, cement type, temperature, W/C)
  • Improved creep resistance and shrinkage resistance characteristics
SikaPlast®-204 TH contains neither chlorides nor other corrosion-inducing subsances and can therefore be used without any restrictions for reinforced concrete structures.

Packaging

200 L/drum
1,000 L/tote or bulk

Colour

Light Brown liquid

Product Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

Complies with ASTM C 494 Type A&G
Product Information

Composition

Modified poly carboxylate in water

Shelf life

12 months from the date of production If stored properly in undamaged, original, sealed packaging.

Storage conditions

Store in dry conditions, protected from direct sunlight at temperature between +5°C and +40°C.

Density

1.040 - 1.060 kg/L (at 25°C)

pH-Value

3.0 - 5.0 Approx.

Application

Application Information

Dispensing

SikaPlast®-204 TH is added to the gauging water prior to its addition to the dry mix or added separately to the wetted concrete mix. For optimum utilisation of the ultra high range water reducer we recommend a minimum wet mixing time of 60 seconds. When adding the balance of the batching water to adjust concrete consistency this should be done after a minimum of 2/3 of the wet mixing time to avoid surplus water in the concrete.

Compatibility

SikaPlast®-204 TH may be combined with all Sikament®, Sika® Aer, SikaPump®, Sikacrete® PP1 products, but must be added separately to the
mix and not pre-mixed prior its addition.
SikaPlast®-204 TH is compatible with all types of Portland Cement, including S.R.C. type and Hydraulic Cement.
Consumption

Recommended dosage

0.6 - 1.6 L per 100 kg of cement or cementitious weight.

Documents