Product Data Sheet Safety Data Sheet Show all documents
Sikanol®

Sikanol®

Air entraining/plasticising admixture

Sikanol® is a liquid admixture developed to plasticise/air entrain sand/cement masonry mortars.

Sikanol® plasticises/air entrains sand/cement masonry mortars.
  • Provides plasticity to sand/cement mortar by the entrainment of a controlled amount of air
  • High levels of consistency and improved cohesion
  • Provides enhanced productivity
Product Data Sheet Safety Data Sheet Show all documents

Usage

Sikanol® is added to the mixing water prior to its addition to the cement : sand mix to provide high quality mortar for :
  • Brickwork and blockwork mortar
  • Cement sand renders and plasters
 

Advantages

Sikanol® plasticises/air entrains sand/cement masonry mortars.
  • Provides plasticity to sand/cement mortar by the entrainment of a controlled amount of air
  • High levels of consistency and improved cohesion
  • Provides enhanced productivity

Packaging

5 L/pail, 25 L/pail

200 L/drum

Colour

Brown liquid

Product Details

Product Information

Composition

Surfactant blend

Shelf life

12 months from date of production if stored properly in undamaged unopened, original sealed packaging

Storage conditions

Store in dry conditions at temperatures between +5°C and +25°C. Protect from direct sunlight and frost.

Density

1.01 Kg/L

pH-Value

9.0 - 11.0 approx.

Total Chloride Ion Content

<0.1%

Equivalent Sodium Oxide

<1.0%
Technical Information

Concreting Guidance

The standard rules of good mortar/concreting practice, concerning production and placing, are to be followed.
Laboratory trials shall be carried out before concreting on site, especially when using a new mix design or producing new concrete components.
Fresh mortar/concrete must be cured properly and curing applied as early as possible.

Application

Application Information

Compatibility

Sikanol® may be combined with many other Sika products.
Important: Always conduct trials before combining products in specific mixes and contact our Technical Service Department for information and advice about any specific combinations.

Dispensing

Sikanol® is added to the gauging water or added with it into the mortar/concrete mixer.

Restrictions

  • When using Sikanol® a suitable mix design has to be taken into account and local material sources shall be trialled.
  • Sikanol® shall not be added to dry cement.
  • Overdosing may increase the entrained air which will give higher workability and a longer working life but lower compressive strength.
  • Saturated bricks/blocks may cause a delay in setting/curing.
  • Support from our Technical Service Department is recommended.
  • Frost: If frozen and / or if precipitation has occurred, Sikanol® may be used after thawing slowly at room temperature followed by intensive remixing.

Equipment

Clean all tools and application equipment with water immediately after use. Hardened / cured material can only be removed mechanically.
Consumption

Recommended Dosage

0.05 – 0.4% by weight of cement

Documents