Product Data Sheet Safety Data Sheet Show all documents
Sika® Antisol® E TH

Sika® Antisol® E TH

CONCRETE CURING AGENT

Sika® Antisol® E TH is a ready to use spray applied liquid curing agent to prevent water loss from the surface of freshly placed concrete. It forms a thin film barrier on the concrete without affecting the normal setting action.

▪ Generally improves the surface appearance
▪ Reduces cracking
▪ Ensures achievement of required strengths
▪ Reduces shrinkage
▪ Controls cement hydration
▪ Reduces dust formation
▪ Improves freeze / thaw resistance
▪ Alleviates other costly curing methods
Product Data Sheet Safety Data Sheet Show all documents

Usage

Large areas of exposed concrete such as:
▪ Roads and Highways
▪ Runways
▪ Roof decks
▪ Hangars and loading areas
▪ Retaining walls
▪ Pre-stressed structures
▪ Irrigation channels
▪ Civil Engineering structures
▪ Industrial floor slabs  

Advantages

▪ Generally improves the surface appearance
▪ Reduces cracking
▪ Ensures achievement of required strengths
▪ Reduces shrinkage
▪ Controls cement hydration
▪ Reduces dust formation
▪ Improves freeze / thaw resistance
▪ Alleviates other costly curing methods

Packaging

25 L/pail
200 L/drum

Colour

Liquid white pigmented emulsion

Product Details

Sustainability / Certifications / Approvals

CERTIFICATES AND TEST REPORTS

Complies with ASTM C309 Type 1-D,  TIS 841-2548 Type 2
Product Information

Shelf life

6 months from date of production if stored properly in undamaged, original, sealed packaging

Storage conditions

Store in dry conditions, protected from direct sunlight at temperatures between +5 °C and +30 °C. Always refer to packaging.

Density

0.96 - 1.00 kg/L

 

Application

Consumption

Consumption

5.0-6.5 m2 per liter
Consumption depends on wind speed, temperature and humidity during
application.
These figures are theoretical and do not allow for any additional material
due to surface porosity, surface profile, variations in level or wastage etc.
Application steps

APPLICATION

Stir thoroughly before use to ensure full dispersion of solids. Spray product in a fine mist to completely cover the concrete surface. Maintain the pressure in the application equipment to ensure a consistent spray.

Documents