Product Data Sheet Safety Data Sheet Show all documents
Sikacrete® PP1 (D)

Sikacrete® PP1 (D)

Mineral Admixture

Sikacrete® PP1 (D) is a concrete admixture of the new generation in powder form, based on the Sika Silica Fume Technology.

Sikacrete® PP1 (D)contains extremely fine (0.1 μm) latently reactive silicone dioxide. The presence of this substance gives greatly improved internal cohesion and water retentivity. The concrete becomes extremely soft and the pumping properties are substancially improved. In the hardened concrete the latently reactive silica fume forms a chemical bond with the free lime. The additional crystal formation produces 
a significantly more dense cement matrix.   Sikacrete® PP1 (D) is used in combination with Sikament® superplasticizer, the performance characteristics of concrete will be improved in the following ways :
  • Increased workability over a longer period of time
  • Green concrete exhibits excellent stability
  • Durability is greatly increased
  • Water permeability of set concrete is much reduced
  • Vapour permeability is much decreased
  • High resistance to carbonation
  • Infiltration of chlorides is very much reduced
  • Very high early and ultimate strengths
  • Reduced deteriortion of migration due to chloride and sulphate reaction
Sikacrete® PP1 (D) does not contain chlorides, nor other potentially corrosive substances. It, therefore can be used with complete safety in steel or fibre-reinforced and prestressed concrete.
Product Data Sheet Safety Data Sheet Show all documents

Usage

Sikacrete® PP1 (D) is used in structural concrete, precast processes, and other fields of concrete constructions to increase the density, durability and compressive strength of concrete.

Advantages

Sikacrete® PP1 (D)contains extremely fine (0.1 μm) latently reactive silicone dioxide. The presence of this substance gives greatly improved internal cohesion and water retentivity. The concrete becomes extremely soft and the pumping properties are substancially improved. In the hardened concrete the latently reactive silica fume forms a chemical bond with the free lime. The additional crystal formation produces 
a significantly more dense cement matrix.   Sikacrete® PP1 (D) is used in combination with Sikament® superplasticizer, the performance characteristics of concrete will be improved in the following ways :
  • Increased workability over a longer period of time
  • Green concrete exhibits excellent stability
  • Durability is greatly increased
  • Water permeability of set concrete is much reduced
  • Vapour permeability is much decreased
  • High resistance to carbonation
  • Infiltration of chlorides is very much reduced
  • Very high early and ultimate strengths
  • Reduced deteriortion of migration due to chloride and sulphate reaction
Sikacrete® PP1 (D) does not contain chlorides, nor other potentially corrosive substances. It, therefore can be used with complete safety in steel or fibre-reinforced and prestressed concrete.

Packaging

20 kg/ bag

Colour

Grey powder

Product Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

Complies with ASTM C1240 - standard specification for silica fume used in cementitious mixtures.
Product Information

Shelf life

12 months from the date of production If stored properly in undamaged, original, sealed packaging.

Storage conditions

Keep in unopened, undamaged original packaging and protected from direct sunshine in dry condition.

Density

Approx. 2.2 kg/l (at 25°C)

Bulk Density

0.60 ± 0.1 kg/I

 

Application

Application Information

Dispensing

Sikacrete® PP1 (D) is added to the dry ingredients at the batching/mixing plant prior the adding of the gauging water. A mixing time of 90 seconds is recommended to ensure uniform dispersion of Sikacrete® PP1 (D)  throughout the mix. The amount of water added should be adjusted according to the dosage of Sikacrete® PP1 (D), Sikament® and the final required consistency. Other Sika concrete admixtures might be incorporated as well, if required for special performance characteristics.
Concrete modified with Sikacrete® PP1 (D) should be placed in the same way as normal concrete of moderate to high-slump consistency. Where Sikacrete® PP1 (D) is used, the concrete mix must be prepared and placed in accordance with the standard rules of high durability concrete practice, and proper curing procedures must be initiated immediately after placement.
Consumption

Recommended Dosage

3-10% by weight of cement.

Documents