Product Data Sheet Safety Data Sheet Show all documents
Sika® Micro SCC

Sika® Micro SCC

Self-Compacting Low Heat Micro Concrete

Sika® Micro SCC is a self-compacting, cementitious micro concrete, with incorporated corrosion inhibitor and extended working time to suit local ambient temperatures.

  • Excellent flowability
  • Good dimensional stability
  • High strength, Adjustable consistency
  • No Bleeding
  • Non-toxic, non-corrosive
  • Ready and easy to use
  • Economical
  • Self-compacting
Product Data Sheet Safety Data Sheet Show all documents

Usage

Sika® Micro SCC is suitable for the following works:
  • Larger Repairs to Reinforced Concrete Structures exposed to industrial or marine environs.Method of placement: Form & Pour or Form & Pump, partial or full member replacement.
  • Re-surfacing of reinforced concrete slabs
  • Any concreting works where access for placement and consolidation is restricted.
 

Advantages

  • Excellent flowability
  • Good dimensional stability
  • High strength, Adjustable consistency
  • No Bleeding
  • Non-toxic, non-corrosive
  • Ready and easy to use
  • Economical
  • Self-compacting

Packaging

25 kg/ bag

Colour

Grey Powder

Product Details

Product Information

Shelf life

12 months from the date of production If stored properly in undamaged, original, sealed packaging.

Storage conditions

Store in dry conditions, protected from direct sunlight at temperature between 5°C and 40°C.

Density

Approx. 1.42 kg/l (Bulk Density)
Technical Information

Compressive Strength

1 day

3 days

7 days

28 days

Water content (8%)

200

260

380

600

* Compressive Strengths (kgf/cm2)

Tensile Adhesion Strength

2.5 Mpa at 28 days

(ASTM C-882)

 

Application

Application Information

Setting Time

Initial

(hours-minutes)

Final
(hours-minutes)

Water content (8%)

3:30

5:20
Consumption

Consumption

2.3 - 2.4 kg / litre (fresh density of micro concrete)
Application steps

MIXING

Powder should be added to the pre-gauged water to suit the desired consistency. For inverted cone of 5 second, approx.2.20 litres of water should be used.Mix mechanically with a plough share type concrete mixer.
Mixing Time: Approximately 4 minutes.

APPLICATION

Pour or pump micro concrete after mixing. Ensure, that entrapped air is allowed to escape. For best results keep micro concrete flow uninterrupted. Make sure, that necessary formwork is firmly in place and watertight.

For structural works it is highly recommended to use SikaTop® Armatec - 110 EpoCem® as bonding bridge.

CLEANING OF EQUIPMENT

Clean all tools and equipment with water immediately after use. Hardened concrete can only be removed mechanically.

Documents