Sikafloor®-01 Primer (TH)
Concentrated resin primer designed to be applied prior to cement & gypsum type products.
- EMICODE EC 1PLUS certified ( Very Low VOC )
- BLUE ANGEL certified ( Eco frendly )
- Solvent-free
- Seals porous concrete
- Low consumption - high coverage
- Non-combustible
- Great penetration into porous concrete surfaces
- Can be applied neat over timber/wood, CFC & Scyon
- Suitable for application on subfloor heating systems
- Eliminates dust
- Versatile water dilution
Usage
- Applied in combination with suitable materials from Sikafloor®, SikaBond®, Sikadur®, SikaTite® & Davco® ranges.
- Suitable for pre-treating surfaces following the recommended preparation & dilution rates
- Enhances bond strength between the substrate and subsequent Sika® materials
- Can be used on internal or external applications
- Designed for commercial, residential & industrial installations
Advantages
- EMICODE EC 1PLUS certified ( Very Low VOC )
- BLUE ANGEL certified ( Eco frendly )
- Solvent-free
- Seals porous concrete
- Low consumption - high coverage
- Non-combustible
- Great penetration into porous concrete surfaces
- Can be applied neat over timber/wood, CFC & Scyon
- Suitable for application on subfloor heating systems
- Eliminates dust
- Versatile water dilution
Packaging
20 L pail
Colour
White
Product Details
SUSTAINABILITY
- Green Star VOC-SCQMD Rule 1168
- EPD according to ISO 14025 and EN 15804
- Solvent-free according to TRGS 610
Composition
Styrene Acrylic Primer
Shelf life
12 months from date of production (in closed packaging)
Storage conditions
Approximately twelve (12) months from date of manufacture when stored in its unopened original container. Store in a cool, dry place.
Do not store below +5 °C. Material that has been mixed with water should be used within a week.
Density
1L = 1kg
System structure
Porous Concrete | Timber/Wood/CFC/Scyon |
Sikafloor®-01 Primer (TH) (diluted) | Sikafloor®-01 Primer (TH) (Neat) |
Subsequent suitable materials | Subsequent suitable materials |
Application
Substrates
- Internal/external concrete
- Internal cement levelling compound/screed
- Internal calcium sulphate based levelling compound
- Internal timber & chipboard floors in raw form (no coatings)
Mixing ratio
Substrate | Diluation / Application |
Normal steel trowel concrete (pourous) | 1L Sikafloor®-01 Primer (TH) : 2L water |
Mechanically prepared concrete (very porous) | 1L Sikafloor®-01 Primer (TH) : 2L water |
Cement levelling compound/screed (very porous) | 1L Sikafloor®-01 Primer (TH) : 2L water x 2 coats (broom applied) |
Timber/wood/CFC/scyon | No dilution, apply neat x 1 coat (roller applied) |
Ambient air temperature
between+5 °C to 35 °C
Substrate temperature
between+5 °C to 35 °C
Waiting time to overcoating
Before appling Flooring/Tiling systems wait
Substrate | Wating ime |
Normal absorbent substrates Concrete | ~10 - 20 min @ 23 °C Per coat |
Calcium sulphate based substrates, if calciumsulphate based levelling compounds are used | ~10 - 20 min @ 23 °C Per coat |
Calcium sulphate based substrates, if cement based levelling compounds are used | ~24 hrs @ 23 °C Per coat |
Timber and chipboards floors | ~2 hrs @ 23 °C Per coat |
Cement levelling substrate, if cement based levelling compounds are used | ~1 hr @ 23 °C Per coat |
See above Mixing Ratio for dilution and coat recommendations.
All values are approximate and subject to variation due to climatic conditions. Please refer also to the product datasheets of the cementitious levelling compounds and tile adhesives.
Consumption
1:2 ~ 7 - 8 m2 per mixed L
Average is depending on absorbency of the substrate, applicator device and mixing ratio.
MIXING
Mix Sikafloor®-01 Primer (TH) at a ratio of 1:2 only with clean cool water.
APPLICATION
Apply diluted
Sikafloor®-01 Primer (TH) by way of a soft bristle broom, or long napped roller 10 – 15mm. Correct amount of mixed primer should always be applied to the prepared substrate, giving good penetration and film build. Thin applications may result in pinholing in finished surface or debonding levelling compound from the substrate.
On particularly porous surfaces where the initial prime coat is absorbed immediately, or mechanically prepared surfaces a second coat is recommended.
Avoid foam during application by adding more liquid.
Apply neat
Sikafloor®-01 Primer (TH) over raw timber/chipboard, CFC & scyon with a long napped roller 10 – 15mm.
Note: For best practice it is recommended subsequent construction materials are applied as soon as primer is dry, but no latter than 24hrs.
- Do not allow primer to pool while drying as this will cause a soft spot under the cement compound.
- Do not allow dust to settle on the surface.
- If dust has contaminated the surface, first vacuum clean and apply another coat of primer before subsequent materials are installed.
CLEANING OF EQUIPMENT
Clean all tools and application equipment with water immediately after use.