SikaTile®-670 TG Pool
CEMENTITIOUS TILE GROUT FOR SWIMMING POOL
SikaTile®-670 TG Pool is a polymer-modified cementitious tile grout designed for joints ranging from 2 to 10 mm. It offers excellent strength, adhesion, and crack resistance properties. The product is hydrophobic and provides good UV resistance.
- Specially designed for use in swimming pools, spas, saunas, fishponds, and fountains.
- Resistant to pool chemicals.
- Prevents black mold and fungus growth.
- Resistant to water pressure.
- Easy to mix and apply.
Usage
- Wet areas such as swimming pool, fishpond,
- For tile gap between 2-10 mm.
- Wall and floor.
- Interior and exterior.
- Most general types of tiles.
Advantages
- Specially designed for use in swimming pools, spas, saunas, fishponds, and fountains.
- Resistant to pool chemicals.
- Prevents black mold and fungus growth.
- Resistant to water pressure.
- Easy to mix and apply.
Packaging
12.3 kg pail, containing Part A (SikaTile®-670 TG Pooll) in 1 kg x 10 bags and Part B (Polymer emulsion) in 230 ml x 10 bags.
Colour
White and Granite
Product Details
CERTIFICATES AND TEST REPORTS
- EN13888 CG2WA/ISO 13007
- ANSI 118.7
- Low VOCs
Shelf life
12 months from date of production if stored properly in undamaged original sealed packaging.
Storage conditions
Store in dry conditions and protected from direct sunlight.
Abrasion resistance
≤ 1,000 mm3 (at 28 days)
Compressive strength
≥ 15 MPa (at 28 days)
Flexural-strength
≥ 2.5 MPa (at 28 days)
Shrinkage
≤ 3 mm/m (at 28 days)
Water absorption
| after 30 min. | ≤ 2 g (at 28 days) |
| after 240 min. | ≤ 5 g (at 28 days) |
Application
Ambient air temperature
min. +5°C to max. +35°C
Mixing ratio
Part A (SikaTile®-670 TG Pool) 1 bag (1 kg) : Part B (Polymer emulsion) 1 bag (230 ml)
Pot Life
30 min. (at 35°C)
Curing time
24 hr.
Waiting time
Tile grout can be applied after 24 hours of tiling application.
Wait 3 - 7 days before filling with water.
Consumption
The consumption of grout varies depending on the size and thickness of the tile, as well as the width of the tile joints (unit: kg/m²)
| Tile size | Thickness | Joint width 1 mm | Joint width 2 mm | Joint width 3 mm |
| 1"x1" | 4 mm | 0.54 | 1.09 | 1.63 |
| 2"x2" | 4 mm | 0.27 | 0.54 | 0.82 |
| 4"x4" | 5 mm | 0.17 | 0.34 | 0.51 |
| 4"x4" | 10 mm | 0.34 | 0.68 | 1.02 |
| 8"x8" | 5 mm | 0.09 | 0.17 | 0.26 |
| 8"x8" | 10 mm | 0.17 | 0.34 | 0.51 |
| 12"x12" | 5 mm | 0.06 | 0.11 | 0.17 |
| 12"x12" | 10 mm | 0.11 | 0.23 | 0.34 |
| 16"x16" | 5 mm | 0.04 | 0.09 | 0.13 |
| 16"x16" | 10 mm | 0.09 | 0.17 | 0.26 |
| 18"x18" | 5 mm | 0.04 | 0.08 | 0.11 |
| 18"x18" | 10 mm | 0.08 | 0.15 | 0.23 |
| 20"x20" | 5 mm | 0.03 | 0.07 | 0.10 |
| 20"x20" | 10 mm | 0.07 | 0.14 | 0.20 |
| 24"x24" | 5 mm | 0.03 | 0.06 | 0.09 |
| 24"x24" | 10 mm | 0.06 | 0.11 | 0.17 |
| Tile size | Thickness | Joint width 4 mm | Joint width 5 mm | Joint width 6 mm |
| 1"x1" | 4 mm | 2.18 | 2.72 | 3.26 |
| 2"x2" | 4 mm | 1.09 | 1.36 | 1.63 |
| 4"x4" | 5 mm | 0.68 | 0.85 | 1.02 |
| 4"x4" | 10 mm | 1.36 | 1.70 | 2.04 |
| 8"x8" | 5 mm | 0.34 | 0.43 | 0.51 |
| 8"x8" | 10 mm | 0.68 | 0.85 | 1.02 |
| 12"x12" | 5 mm | 0.23 | 0.28 | 0.34 |
| 12"x12" | 10 mm | 0.45 | 0.57 | 0.68 |
| 16"x16" | 5 mm | 0.17 | 0.21 | 0.26 |
| 16"x16" | 10 mm | 0.34 | 0.43 | 0.51 |
| 18"x18" | 5 mm | 0.15 | 0.19 | 0.23 |
| 18"x18" | 10 mm | 0.30 | 0.38 | 0.45 |
| 20"x20" | 5 mm | 0.14 | 0.17 | 0.20 |
| 20"x20" | 10 mm | 0.27 | 0.34 | 0.41 |
| 24"x24" | 5 mm | 0.11 | 0.14 | 0.17 |
| 24"x24" | 10 mm | 0.23 | 0.28 | 0.34 |
(roughly 1 inch = 2.5 cm. = 25 mm.)
Waste will occur according to actual field performance including working method, skill, and site condition.
MIXING
-
Put Part B (Polymer emulsion) 1 bag in a mixing bucket.
-
Gradually add Part A (SikaTile®-670 TG Pool) 1 bag into the bucket and mix with a power drill until the
compound is evenly homogeneous, lump-free paste.
-
Leave to stand for several minutes.
-
Do not add any additional water.
APPLICATION
-
Allow 24 hours after tilling.
-
Use a rubber float to fill the joint in a diagonal
motion.
-
Remove excess grout.
-
Ensure the grout is pressed into the joint and not just sitting on top.
-
Quick clean with a damp sponge.
-
Allow 2 hours before cleaning with a dry cloth.
-
Allow 1 day before foot traffic.
-
Allow 3 - 7 days before filling with water.
CLEANING OF EQUIPMENT
Remove grout from tools, equipment, and tiles with clean water after application.
Consumption Calculator
Remark:
- This calculator was developed base on SikaTile tile grout and tile adhesive specification.
- The result are average and vary, depend on job site condition. Please contact Sika’s Sales Representative for specific consultant.
Recommended trowel size:
- Trowel size 3 mm, suitable for tile size <10x10 cm.
- Trowel size 6 mm, suitable for tile size between 10x10 to 30x30 cm.
- Trowel size 9 mm, suitable for tile size >30x30 cm.