Product Data Sheet Safety Data Sheet Show all documents
LANKO® 102 Interior Skimcoat

LANKO® 102 Interior Skimcoat

ready to use interior wall and ceiling skimcoat

LANKO® 102 Interior Skimcoat  is a ready to use skim smoothing rendering, white color paste for levelling uneven interior surfaces and fill-up small bubbles in concrete surface, aggregate effect or hair-line cracks on general rendering. It also gives a very smooth natural white surface and create a more aesthetic appearance for wall decoration such as paint or wall-paper.

  • Ready to use paste
  • Perfectly white smooth finish
  • Can be use as decorative top-coat without painting or paint over with or without primer
  • Excellent trowel ability
  • Money and time saving (less paint may be required)
Where to buy
Product Data Sheet Safety Data Sheet Show all documents

Usage

LANKO® 102 Interior Skimcoat is suitable for wall and ceiling, interior application.
  Permissible Substrates
Interior
  • Shuttered concrete
  • Reinforced concrete shell work
  • Render
  • Gypsum board
  • Concrete soffits
  • Precast concrete panels
  • Plaster board
  Suitable Covering Materials
  • Thick synthetic finish coats
  • Paint
  • Wallpaper
  • Fabric
  • Bonded plastic coverings

Advantages

  • Ready to use paste
  • Perfectly white smooth finish
  • Can be use as decorative top-coat without painting or paint over with or without primer
  • Excellent trowel ability
  • Money and time saving (less paint may be required)

Packaging

20 kg/pail

Colour

White paste

Product Details

Product Information

Composition

Synthetic resins, mineral filler and admixtures

Shelf life

12 months from date of production if stored in undamaged and unopened, original sealed packaging

Storage conditions

Store in dry condition and protected from direct sunshine

Density

1.7 - 1.8 kg/L

pH-Value

8 - 10
Technical Information

Tensile adhesion strength

≥ 0.5 MPa at 28 days at 1 mm thickness (on concrete)

Application

Application Information

Layer thickness

0.3 - 2.0 mm

Ambient air temperature

+10°C to +35°C

Waiting time to overcoating

~24 - 48 hours
Consumption

Consumption

Approx. 0.5 - 1.5 kg/m2 per 1 mm thickness
Application steps

MIXING

Ready-to-use paste. No water must be added.

APPLICATION

  1. Apply LANKO® 102 Interior Skimcoat 1st coat with stainless trowel or spray.
  2. A minimum of 2 coats are required to obtain a satisfactory surface.
  3. Allow sufficient drying time for 10 - 30 minutes so that is not drawn off while applying 2nd coat.
  4. Can use sand paper no.380 to polish the surface.
  5. Allow 24 - 48 hours curing time before applying covering material.

Documents