Product Data Sheet Safety Data Sheet Show all documents
LANKO® 103 Skimcoat Plus

LANKO® 103 Skimcoat Plus

READY TO USE INTERIOR & EXTERIOR WALL AND CEILING SKIMCOAT

LANKO® 103 Skimcoat Plus is a ready to use skim smoothing rendering, white color paste for levelling uneven interior surfaces and fill-up small bubbles in concrete surface, aggregate effect or hair-line cracks on general rendering. It can be applied on both exterior and interior surfaces. It also gives a very smooth natural white finishing.

  • Ready to use paste
  • Perfectly white smooth finish
  • Can be use as decorative top-coat without painting or paint over with or without primer
  • Excellent trowel ability
  • Can be applied by spray-machine to create to create a texture rough surface
  • UV resistance
  • Money and Time saving (less paint may be required).
Where to buy
Product Data Sheet Safety Data Sheet Show all documents

Usage

LANKO® 103 Skimcoat Plus is suitable for wall and ceiling, interior and exterior application.
  Permissible Substrates
Interior / Exterior
  • Shuttered concrete
  • Reinforced concrete shell work
  • Concrete soffits
  • Precast concrete panels
Interior only
  • Light-weight concrete block (Apply Lanko 751 mix with water by ratio 2:1 as a primer layer)
  • Bricks
  • Gypsum block, gypsum board
  • Gypsum (Consult Technical Service for further advice in this situation)
  Suitable Covering Materials
  • Thick synthetic finish coats
  • Mineral paint
  • Wallpaper
  • Fabric
  • Bonded plastic coverings

Advantages

  • Ready to use paste
  • Perfectly white smooth finish
  • Can be use as decorative top-coat without painting or paint over with or without primer
  • Excellent trowel ability
  • Can be applied by spray-machine to create to create a texture rough surface
  • UV resistance
  • Money and Time saving (less paint may be required).

Packaging

5 kg/pail, 20 kg/pail

Colour

White paste

Product Details

Product Information

Composition

Synthetic resins, mineral filler and admixtures

Shelf life

12 months from date of production if stored in undamaged and unopened, original sealed packaging

Storage conditions

Store in dry condition and protected from direct sunshine

Density

1.7 - 1.8 kg/L

pH-Value

8 - 10
Technical Information

Tensile adhesion strength

≥ 0.5 MPa at 28 days at 1 mm thickness (on concrete)

Application

Application Information

Layer thickness

0.3 - 2 mm

Ambient air temperature

+10°C to +35°C

Waiting time to overcoating

~24 hours
Consumption

Consumption

Approx. 0.5 - 1.5 kg/m2 per 1 mm thickness
Application steps

MIXING

Ready-to-use paste. No water must be added.

APPLICATION

  1. Apply LANKO® 103 Skimcoat Plus 1st coat with stainless trowel or spray.
  2. A minimum of 2 coats are required to obtain a satisfactory surface.
  3. Allow sufficient drying time for 10 - 30 minutes so that is not drawn off while applying 2nd coat.
  4. Use sand paper to obtain a smooth finish.
  5. Allow 24 hours curing time before applying covering material.

Documents