Product Data Sheet Safety Data Sheet Show all documents
LANKO® 104 Skimcoat Flex

LANKO® 104 Skimcoat Flex

READY TO USE WALL AND CEILING FLEXIBLR SKIMCOAT FOR INTERIOR & EXTERIOR DEFECTS

LANKO® 104 Skimcoat Flex is a high performance and ready-to-use flexible skim smoothing rendering , white color paste for levelling uneven wall/ceiling surfaces and repairing defects on concrete or render surfaces such as small bubbles, grooves, seams, fine cracks or aggregate effect. It can be applied on both  exterior or and interior surfaces with good adhesion and weathering resistance, perfectly smooth finish, high flexible, no crack, no chalk and can be sanded and paintable.

  • Ready to use paste
  • Perfectly white smooth finish with excellent trowel ability
  • High flexible and bonding strength
  • Elongation not less than 20% (7 Days, ASTMD412)
  • Anti-fungi
  • Good weather resistance
  • No crack and low smell
  • Multi-layer coated without cracking
  • Can be sanded and over painted
  • Friendly environment
Where to buy
Product Data Sheet Safety Data Sheet Show all documents

Usage

LANKO® 104 Skimcoat Flex is suitable for interior and exterior application to cover wall and ceiling area on various substrates such as masonry wall, precast concrete panel, fiber concrete, fiber cement, gypsum or drywall. Especially suitable design for covering on epoxy-polyurethane joint filler, Sikadur®-61 Epoxy PU Joint.  

Advantages

  • Ready to use paste
  • Perfectly white smooth finish with excellent trowel ability
  • High flexible and bonding strength
  • Elongation not less than 20% (7 Days, ASTMD412)
  • Anti-fungi
  • Good weather resistance
  • No crack and low smell
  • Multi-layer coated without cracking
  • Can be sanded and over painted
  • Friendly environment

Packaging

5 kg/pail

Product Details

Product Information

Composition

Acrylic polymer

Shelf life

12 months from date of production if stored in undamaged and unopened,original sealed packaging

Storage conditions

Store in dry condition and protected from direct sunshine

Density

1.5 - 1.6 kg/L

pH-Value

8 - 10 
Technical Information

Tensile strength

≥ 1.0 MPA at 7 Days (ASTM D412)

Tensile adhesion strength

≥ 1.5 MPa at 7days (ASTM D4541)

 

Application

Application Information

Layer thickness

0.5 - 1.0 mm

Ambient air temperature

+10°C to +40°C

Curing time

24 hours (Sandable)

Waiting time to overcoating

1-2 hour
Application steps

MIXING

Ready-to-use paste. No water must be added.

 

APPLICATION

  1. Apply LANKO 104 Skimcoat Flex  1st coat with stainless trowel.
  2. A minimum of 2 coats are required to obtain a satisfactory surface.
  3. Allow sufficient drying time for 60 - 120 minutes so that is not drawn off while applying 2nd coat.
  4. Use sand paper to obtain a smooth finish after 16-24 hours.
  5. Allow 24 hours curing time before applying covering  material.
  6. Clean tools and equipment with detergent and water.

Documents