Product Data Sheet Safety Data Sheet Show all documents

LANKO® 107 Wall Putty

READY TO USE ACRYLIC PUTTY

LANKO® 107 Wall Putty is a ready to use acrylic wall putty for filling or patching cracks,  nail holes, grooves, seams air bubbles and rock pocket. Its ready to use formula spreads easily for fast repairs that will not crack, crumble or flake.

  • Ready to use, no mixing required
  • Fast drying
  • No shrinkage
  • Good adhesion
  • Anti-black mold
  • Can be sanded and over painted
Where to buy
Product Data Sheet Safety Data Sheet Show all documents

Usage

  • LANKO® 107 Wall Putty is suitable for wall and ceiling, interior and exterior application
  • LANKO® 107 Wall Putty can be used on substrates including concrete, brick, lightweight block and wood  

Advantages

  • Ready to use, no mixing required
  • Fast drying
  • No shrinkage
  • Good adhesion
  • Anti-black mold
  • Can be sanded and over painted

Packaging

1.5 kg/pail, 5 kg/pail

Colour

White paste

Product Details

Product Information

Composition

Synthetic resins, mineral filler and admixtures

Shelf life

12 months from date of production if stored in undamaged and unopened,
original sealed packaging

Storage conditions

Store in dry condition and protected from direct sunshine

Density

1.7 - 1.8 kg/L

pH-Value

8 - 10
Technical Information

Tensile adhesion strength

≥ 0.5 MPa at 28 days (at 1 mm thickness)
 

Application

Application Information

Layer thickness

0.3 - 4 mm

Ambient air temperature

+10°C to +35°C

Waiting time to overcoating

~24 hours
Application steps

MIXING

LANKO® 107 Wall Putty is supplied ready to use - no water or other mixing is added.

APPLICATION

Lanko 107 Wall Putty can be applied with putty knife in layer thicknesses from 0.3 - 4 mm. When filling deeper holes or cracks above 4 mm the filler must be applied in several layers and must be allowed to almost dry before each subsequence layer is applied. Allow a sufficient drying time for 10-30 minutes, use sand paper to remove the remaining from the surface. Allow 24 hours curing time before applying covering material.

Documents