Product Data Sheet Safety Data Sheet Show all documents
LANKO® Loft

LANKO® Loft

INDUSTRIAL LOFT STYLE RENDERING  DECORATIVE CEMENT

LANKO® Loft is a special cementitious mortar used with a coating wax which is formulated to create industrial loft style.

LANKO® Loft is easy to apply, can create industrial loft texture and pattern.
LANKO® Loft has the following advantages:
  • Water repellent and shiny finish when LANKO WAX is applied
  • Odorless
  • Non solvent and non flammable wax
Where to buy
Product Data Sheet Safety Data Sheet Show all documents

Usage

LANKO® Loft can be applied on concrete surfaces and render as decorative interior and exterior wall.  

Advantages

LANKO® Loft is easy to apply, can create industrial loft texture and pattern.
LANKO® Loft has the following advantages:
  • Water repellent and shiny finish when LANKO WAX is applied
  • Odorless
  • Non solvent and non flammable wax

Packaging

8 kg. pail (powder 7 kg. wax 1 kg.)
20 kg. pail (powder)

Colour

Grey and ligth grey powder

Product Details

Product Information

Composition

Synthetic resins, mineral filler and admixtures

Shelf life

12 months from date of production if stored in undamaged and unopened, original sealed packaging

Storage conditions

Store in dry condition and protected from direct sunshine

Density

0.9 - 1.0 kg/L

Maximum grain size

0.3 mm

pH-Value

12
Technical Information

Tensile adhesion strength

> 0.5 MPa at 28 days

Application

Application Information

Mixing ratio

Approx. 8.5 to 9.0 liters water per 20 kg of powder

Approx. 3.0 to 3.15 liters water per 7 kg of powder

Layer thickness

0.5 - 2 mm

Ambient air temperature

+5°C to +35°C

Pot Life

Approx. 120 minutes (at 25°C)

Initial set time

Approx. 240 minutes (at 25°C)

Waiting time to overcoating

Approx. 2 - 4 hours
Consumption

Consumption

Approx. 10 - 15 m2 / 8 kg set

Approx. 25 - 35 m2 / 20 kg powder
Application steps

MIXING

Mix LANKO® Loft with water until a homogenous mixture is achieved. Leave the mixture to stand for several minutes.

  • Use water 3 - 3.15 L per LANKO® Loft 7 kg. powder
  • Use water 8.5 - 9 L per LANKO® Loft 20 kg. powder

APPLICATION

  1. Apply the first coat with stainless trowel to create pattern and close porous on substrate.
  2. One or more additional coats can be applied to meet the required thickness and texture.
  3. Allow a sufficient drying time between the coats for 30-45 minutes.
  4. Can use sand paper no. 380 to smooth the surface.
  5. Apply LANKO LOFT WAX on the surface by using plastic paddle after LANKO LOFT powder has been applied. The surface must be clean, dry (2-4 hours after applying LANKO LOFT powder, depends on weather condition) and dust free. Two coats of wax will be more water repellent and have a more shinny finish. (Wait 30 minutes between coat)  

Documents