Product Data Sheet Safety Data Sheet Show all documents
Sika® Separol TH

Sika® Separol TH

FORM RELEASE AGENT

Sika® Separol TH is an oil based ready to use form release agent which provides complete release of concrete or grout from steel or wooden formwork. It does not stain, extends the life of the formwork and provides a good quality aesthetic concrete finish.

▪ Ready to use
▪ Easy to apply
▪ Fast stripping and cleaning of formwork
▪ Combined chemical and physical action
▪ Extends life of formwork
▪ Ensures fair faced concrete finish which makes it ideal for architectural concretes
▪ Reduces air bubbles which may appear on concrete surfaces
▪ Non staining
▪ Economical consumption
▪ Suitable for application to formwork used in curing and damp processes
▪ All types of concrete
Where to buy
Product Data Sheet Safety Data Sheet Show all documents

Usage

▪ Form release agent for steel or wooden formwork
▪ Providing a good quality aesthetic concrete finish
▪ Extending the life of formwork  

Advantages

▪ Ready to use
▪ Easy to apply
▪ Fast stripping and cleaning of formwork
▪ Combined chemical and physical action
▪ Extends life of formwork
▪ Ensures fair faced concrete finish which makes it ideal for architectural concretes
▪ Reduces air bubbles which may appear on concrete surfaces
▪ Non staining
▪ Economical consumption
▪ Suitable for application to formwork used in curing and damp processes
▪ All types of concrete

Packaging

25 L / pail
200 L / drum

Colour

Amber / yellowish

Product Details

Product Information

Shelf life

24 months from date of production

Storage conditions

The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C.

Density

0.820 - 0.870 kg/L @ 25 °C

Application

Consumption

Consumption

Wooden formwork                    ~13–21 m2/L
Metal or plastic formwork        ~27–42 m2/L
Consumption depends on the roughness and absorbency of the formwork. These figures are theoretical and do not allow for any additional material due to surface porosity, surface profile, variations in level or wastage etc.

 
Application steps

APPLICATION

Surface preparation
All surfaces to be coated with Sika® Separol TH must be clean and free from dirt, dust, grease and any remaining concrete or grout residue. Steel formwork must be dry. Used formwork must be cleaned before using Sika® Separol TH.
Application
Ensure full mixing before applying. Apply a single, uniform and continuous thin layer of Sika® Separol TH on the full area of dry or damp formwork
using a brush, roller or spray equipment. For architectural aesthetic concrete finishes, consumption may need to be adjusted. A preliminary trial must be carried out before full application in all situations.
Cleaning of equipment
Clean all tools and application equipment with cleaning solvent, dissolvent or petroleum ether immediately after use. Hardened material can only be removed mechanically.

Documents