
Sika Boom® AP
Sika®Boom®-AP is a 1-component, fast curing polyurethane foam suitable for multi-position applications.
- 1-component
- Multi-positioning foam; application in all positions
- Easy application with nozzle
- High expansion rate
- Fast curing
- Very good thermal and sound insulation
- Can be cut, sanded and over painted
- HFC-free
Usage
Sika®Boom®-AP is used for fixing, insulating and filling connection joints around window and door frames, pipe entries, air conditioning vents and roller blind housings.Sika®Boom®-AP allows insulation against noise, cold and draughts after single application
Advantages
- 1-component
- Multi-positioning foam; application in all positions
- Easy application with nozzle
- High expansion rate
- Fast curing
- Very good thermal and sound insulation
- Can be cut, sanded and over painted
- HFC-free
Packaging
500 ml can (12 cans per box)
Colour
Light Yellow
Product Details
Composition
Polyurethane
Shelf life
Sika Boom®-AP has a shelf life of 12 months from the date of production, if stored properly in undamaged, original, sealed packaging, and if the storage conditions are met. Opened cans of Sika Boom®-AP must be used within 4 weeks.
Storage conditions
Sika Boom®-AP shall be stored in an upright position, in dry conditions, protected from direct sunlight and at temperatures between +5 °C and +25 °C.
Density
21 kg/m3
Compressive Strength
~0.04 N/mm2 (with 10% deformation) | (ISO 844) |
Tensile Strength
~0.01 N/mm2 | (ISO 1926) |
Shear Strength
~0.04 N/mm2 | (ISO 1922) |
Dimensional Stability
± ~5 %
Joint Permeability to Water Vapour
μ = 21, sd = 1.0 m (d = 49 mm, p = 19.5 kg/m3) | (ISO 12572) |
Thermal Conductivity
~0.0405 W/mK | (EN 12667) |
Sound Insulation
RST,w (C;Ctr) = 61 (−1; −4) dB | (ift SC-01/2) |
Service Temperature
−40 °C min. / +80 °C max.
Application
Ambient Air Temperature
Optimum | +18 °C min. / +25°C max. |
Permissable | +5 °C min. / +35 °C max. |
Relative Air Humidity
30 % min. / 95 % max.
Substrate Temperature
Optimum | +18 °C min. / +25°C max. |
Permissable | +5 °C min. / +35 °C max. |
Curing Time
Sika Boom®-AP is fully cured after 12 hours.
Cutting Time
~30 min. (after which a 20 mm bead can be cut).
Tack free time
~10 min.
Yield
500ml | ~25L |
750ml | ~37L |
Consumption can be regulated by adjusting the pressure on the valve.
SUBSTRATE PREPARATION
The substrate must be clean, sound and homogeneous, free from oils, grease, dust and loose or friable particles. Paint, cement laitance and other poorly adhering contaminants must be removed. Sika Boom®-AP adheres without primers and/or activators. Pre-dampen the substrate with a mist spray of clean water, this ensures that the foam cures properly and also prevents secondary foam expansion.
CLEANING OF EQUIPMENT
Clean all tools and application equipment immediately with Sika Boom® Cleaner and/or Sika® Remover-208. Once cured, residual material can only be removed mechanically.
VDO
For this content to be displayed, you need to accept all cookies in the cookie settings and confirm your selection or by clicking the “Allow All” button.
For this content to be displayed, you need to accept all cookies in the cookie settings and confirm your selection or by clicking the “Allow All” button.