Product Data Sheet Show all documents
SikaTile®-370 XL Multi Purpose

SikaTile®-370 XL Multi Purpose

PREMIUM FLEXIBLE CEMENT BASED TILE ADHESIVE

SikaTile®-370 XL Multi Purpose is a premium flexible tile adhesive, with high-end polymers as a single component, pre-packed tiling adhesive mortar combining cement with selected grades of sand and several additives. Only requires the addition of water.

  • Flexible: suitable for laying tile on deformable
    substrates such as gypsum boards, Viva boards, and     fiber cement sheets, depending on weight and size.     (please contact us for more details)
  • Tile on tile application.
  • Superior water resistance for immersed environments, such as swimming pools.
  • Ideal for tiling in heavy-duty and high-vibration areas.
  • Excellent bond strength.
  • Mix and spread more easily and evenly.
SikaTile®-370 XL Multi Purpose
Where to buy
Product Data Sheet Show all documents

Usage

  • Suitable for various tiles, sizes, and substrates,
    including tiling on old tiles.
  • Ideal for tiling in swimming pools, spas, and saunas.
  • Wall and Floor.
  • Exterior and Interior.
  • On waterproof membranes.
  • Types of substrate: concrete, mortar, cement render.  

Advantages

  • Flexible: suitable for laying tile on deformable
    substrates such as gypsum boards, Viva boards, and     fiber cement sheets, depending on weight and size.     (please contact us for more details)
  • Tile on tile application.
  • Superior water resistance for immersed environments, such as swimming pools.
  • Ideal for tiling in heavy-duty and high-vibration areas.
  • Excellent bond strength.
  • Mix and spread more easily and evenly.

Packaging

20 kg/ bag

25 kg/ bag

Colour

Grey/ White powder

Product Details

Sustainability / Certifications / Approvals

CERTIFICATES AND TEST REPORTS

  • EN 12004 C2TE
  • ANSI 118.4
  • TIS 2703-2559
Product Information

Composition

Hydraulic binder, mineral filler and admixtures

Shelf life

12 months from date of production if stored in undamaged and unopened, original sealed packaging

Storage conditions

Store in dry condition and protected from direct sunshine

Density

1.3 ± 0.1 kg/L

pH-Value

12 ± 1

 
Technical Information

Tensile adhesion strength

At 28 days

Initial

≥ 1.0 MPa

Water immersion

≥ 1.0 MPa

Heat aging≥ 1.0 MPa
Open time bonding after 20 min≥ 0.5 MPa
Extended open time after not less than 30 min≥ 0.5 MPa

Shear adhesion strength

Glazed Wall Tile

7 days

≥ 2.07 MPa

7 days water immersion

≥ 1.38 MPa

Porcelain Mosaic Tile

1 day

≥ 0.5 MPa

7 days

≥ 1.38 MPa

7 days water immersion≥ 1.03 MPa
28 days≥ 1.38 MPa

Quarry Tile

28 days

≥ 1.03 MPa

Application

Application Information

Slip resistance

≤ 0.5 mm

Ambient air temperature

+5°C to +35°C

Mixing ratio

Approximate 4.8 to 5.2 litre water per bag 20 kg

Approximate 6 to 6.5 litre water per bag 25 kg

Pot Life

180 - 240 minutes (at 25°C)

Open Time

20 - 25 minutes (at 25°C)

Adjustability time

15 - 20 minutes (at 25°C)

Applied product ready for use

~ 24 hours

 
Consumption

Consumption

Trowel Size

Tile Size

(cm x cm)

Tile Surface

(cm2)

Consumption

(20 kg)

Consumption

(25 kg)

3 mm

2.5 x 2.5

5 x 5

6.25

25

7 - 8 m2

9 - 10 m2

6 mm

10 x 10

20 x 20

20 x 25

30 x 30

100

400

500

900

5 - 6 m2

6.5 -7.5 m2

9 mm

40 x 40

50 x 50

60 x 60

> 60 x 60

1,600

2,500

3,600

> 3,600

2 - 3 m2

2.5 - 3.5 m2

Note : 

1. This is an average calculation. Actual usage may differ from the estimate. Due to the different surface conditions. Surface absorption and the purpose of the individual's use.

2. For tile sizes larger than 40x40 cm, apply tile adhesive on the surface and a very thin layer on the back of the tile.
Application steps

MIXING

  • Mix SikaTile®-370 XL Multi Purpose

    - 20 kg with 4.8 - 5.2 Litres of clean water

    - 25 kg with 6.0 - 6.5 Litres of clean water

    with an electrical mixer until the compound is

    evenly distributed.

  • Allow the mixture to stand for 2 - 3 minutes for a good reaction and reduce air bubbles before using the adhesive. 

APPLICATION

  • Spread tile adhesive by using a notched trowel onto the substrate.
  • Fix tile on tile adhesive and knock it over with a

    rubber hammer.

  • Dual bonding should be applied when the tile size

    exceeds 25 cm x 25 cm. Apply a thin layer of tile

    adhesive onto the back of the tile, then fix the tile

    onto the adhesive substrate.

  • Once the tiles have been laid, leave them to stand for 24 hours or until the tile adhesive is dry before grouting with SikaTile Tile Grout.  

Documents