Product Data Sheet Show all documents

SikaTile®-630 TG Wide Gap

PREMIUM TILE GROUT, MOLD AND STAIN RESISTANT

SikaTile®-630 TG Wide Gap is a CG2WA polymer modified premixed colored tile grout with water-repellent properties. Provides active protection against bacteria, algae, fungi, and black mold, which can cause stains or deterioration of the grouting.

  • Anti-black mold and fungus; resistant to bacteria and algae
  • Water-repellent with low porosity to minimize dirt absorption
  • High strength, adhesion, crack, and abrasion
    resistance
  • Resistant to common household cleaning agents
  • Easy to mix with smooth application for faster
    installation
  • Provides full joint filling with a smooth and uniform finish
Where to buy
Product Data Sheet Show all documents

Usage

  • Grouting the joints for most general types of tiles
  • Grouting gaps from 1 to 6 mm width
  • Floor and wall
  • Exterior and Interior
  • Especially used in damp areas such as bathrooms, kitchens, bedrooms, balconies, and other residential or common areas  

Advantages

  • Anti-black mold and fungus; resistant to bacteria and algae
  • Water-repellent with low porosity to minimize dirt absorption
  • High strength, adhesion, crack, and abrasion
    resistance
  • Resistant to common household cleaning agents
  • Easy to mix with smooth application for faster
    installation
  • Provides full joint filling with a smooth and uniform finish

Packaging

1 kg bag, 10 bags per box

Colour

10 colors

10# Snow White13# Silver Gray21# Titanium
16# Manhattan Stone46# Bahama Beige52# Jura Beige
57# Warm Cream58# Havana Oak60# Teak
70# Black

Product Details

Sustainability / Certifications / Approvals

CERTIFICATES AND TEST REPORTS

  • EN13888 CG2WA

  • ANSI 118.6
Product Information

Composition

Portland cement, selected aggregates, water retention additives, re-dispersible polymer

Shelf life

18 months from the date of production if stored properly in undamaged original sealed packaging

Storage conditions

Store in original, unopened, and undamaged sealed packaging under dry conditions. Protect from direct sunlight and frost.

Density

0.9 - 1.1 kg./L

 
Technical Information

Abrasion resistance

≤ 1,000 mm3 (at 28 days) (EN 12808-2)

Compressive strength

After dry storage≥ 15 Mpa (at 28 days) 
After freeze-thaw cycles≥ 15 MPa (at 28 days) 
> 3,000 psi (at 28 days) (ANSI A118.6 Section 4.5)

Flexural-strength

After dry storage≥ 2.5 Mpa (at 28 days) 
After freeze-thaw cycles≥ 2.5MPa (at 28 days) 
> 500 psi (at 28 days) (ANSI A118.6 Section 4.7)

Shrinkage

≤ 3 mm/m (at 28 days) (EN 12808-4)
< 0.30% (at 28 days) (ANSI A118.6 Section 4.3)

Water absorption

after 30 minutes≤2 g (at 28 days) 
After 240 minutes≤ 5 g (at 28 days) 
< 18% (at 28 days)  (ANSI A118.6 Section 4.4)

Application

Application Information

Mixing ratio

0.33-0.34 litres of clean water per 1 kg bag of SikaTile®-630 TG Wide Gap

Ambient air temperature

min. +5°C to max. +35°C

Pot Life

Approx. 60 minutes (25°C)

Waiting time

Tile grout can be applied after 24 hours of tiling application.
Wait 24 hours before traffic.
Consumption

Consumption

The consumption of grout varies depending on the size and thickness of the tile, as well as the width of the tile joints (unit: kg/m²)

Tile size

(mm)

Joint width

1 mm

Joint width

2 mm

Joint width

3 mm

25x25x4

0.54

1.09

1.63

50x50x4

0.27

0.54

0.82

100x100x5

0.17

0.34

0.51

100x100x10

0.34

0.68

1.02

200x200x5

0.09

0.17

0.26

200x200x10

0.17

0.34

0.51

300x300x5

0.06

0.11

0.17

300x300x10

0.11

0.23

0.34

400x400x5

0.04

0.09

0.13

400x400x10

0.09

0.17

0.26

450x450x5

0.04

0.08

0.11

450x450x10

0.08

0.15

0.23

500x500x5

0.03

0.07

0.10

500x500x10

0.07

0.14

0.20

600x600x5

0.03

0.06

0.09

600x600x10

0.06

0.11

0.17

Tile size

(mm)

Joint width

4 mm

Joint width

5 mm

Joint width

6 mm

25x25x4

2.18

2.72

3.26

50x50x4

1.09

1.36

1.63

100x100x5

0.68

0.85

1.02

100x100x10

1.36

1.70

2.04

200x200x5

0.34

0.43

0.51

200x200x10

0.68

0.85

1.02

300x300x5

0.23

0.28

0.34

300x300x10

0.45

0.57

0.68

400x400x5

0.17

0.21

0.26

400x400x10

0.34

0.43

0.51

450x450x5

0.15

0.19

0.23

450x450x10

0.30

0.38

0.45

500x500x5

0.14

0.17

0.20

500x500x10

0.27

0.34

0.41

600x600x5

0.11

0.14

0.17

600x600x10

0.23

0.28

0.34

Waste will occur according to actual field performance, including working method, skill, and site condition.
Application steps

APPLICATION INSTRUCTIONS

MIXING

Mix 1 kg. bag of SikaTile®-630 TG Wide Gap with 0.33 - 0.34 liters of clean water until the product is evenly distributed. Let it stand for several minutes. Re-stir

before using. Only mix enough grout to cover 2 sqm. at a time.

APPLICATION

  • Wait 24 hours after tilling before applying tile grout.

  • Use a rubber trowel to fill the joint in a diagonal motion.

  • Wipe off excess grout.

  • Ensure the grout is pressed into the joints and not just sitting on top.

  • Quickly clean with a damp sponge.

  • Allow 2 hours before cleaning with a dry cloth.

  • Allow 24 hours before allowing traffic.

CLEANING OF EQUIPMENT

Tools and equipment must be cleaned up in water before the grout dries thoroughly. 

 

Documents

Consumption Calculator

Remark:

  • This calculator was developed base on SikaTile tile grout and tile adhesive specification.
  • The result are average and vary, depend on job site condition. Please contact Sika’s Sales Representative for specific consultant.

Recommended trowel size:

  • Trowel size 3 mm, suitable for tile size <10x10 cm.
  • Trowel size 6 mm, suitable for tile size between 10x10 to 30x30 cm.
  • Trowel size 9 mm, suitable for tile size >30x30 cm.