Product Data Sheet Show all documents
SikaTile®-670 TG Pool

SikaTile®-670 TG Pool

CEMENTITIOUS TILE GROUT FOR SWIMMING POOL

SikaTile®-670 TG Pool is a polymer-modified cementitious tile grout designed for joints ranging from 2 to 10 mm. It offers excellent strength, adhesion, and crack resistance properties. The product is hydrophobic and provides good UV resistance.

  • Specially designed for use in swimming pools, spas, saunas, fishponds, and fountains.
  • Resistant to pool chemicals.
  • Prevents black mold and fungus growth.
  • Resistant to water pressure.
  • Easy to mix and apply.
Where to buy
Product Data Sheet Show all documents

Usage

  • Wet areas such as swimming pool, fishpond,
    fountain, spa, and sauna.
  • For tile gap between 2-10 mm.
  • Wall and floor.
  • Interior and exterior.
  • Most general types of tiles.  

Advantages

  • Specially designed for use in swimming pools, spas, saunas, fishponds, and fountains.
  • Resistant to pool chemicals.
  • Prevents black mold and fungus growth.
  • Resistant to water pressure.
  • Easy to mix and apply.

Packaging

12.3 kg pail, containing Part A (SikaTile®-670 TG Pooll) in 1 kg x 10 bags and Part B (Polymer emulsion) in 230 ml x 10 bags.

Colour

White and Granite

 

Product Details

Sustainability / Certifications / Approvals

CERTIFICATES AND TEST REPORTS

  • EN13888 CG2WA/ISO 13007
  • ANSI 118.7
  • Low VOCs
Product Information

Shelf life

12 months from date of production if stored properly in undamaged original sealed packaging.

Storage conditions

Store in dry conditions and protected from direct sunlight.
Technical Information

Abrasion resistance

≤ 1,000 mm3 (at 28 days)

Compressive strength

≥ 15 MPa (at 28 days)

Flexural-strength

≥ 2.5 MPa (at 28 days)

Shrinkage

≤ 3 mm/m (at 28 days)

Water absorption

after 30 min.

≤ 2 g (at 28 days)

after 240 min.

≤ 5 g (at 28 days)

Application

Application Information

Ambient air temperature

min. +5°C to max. +35°C

Mixing ratio

Part A (SikaTile®-670 TG Pool) 1 bag (1 kg) : Part B (Polymer emulsion) 1 bag (230 ml)

Pot Life

30 min. (at 35°C)

Curing time

24 hr.

Waiting time

Tile grout can be applied after 24 hours of tiling application.
Wait 3 - 7 days before filling with water.

 
Consumption

Consumption

The consumption of grout varies depending on the size and thickness of the tile, as well as the width of the tile joints (unit: kg/m²)

Tile size

Thickness

Joint width

1 mm

Joint width

2 mm

Joint width

3 mm

1"x1"

4 mm

0.54

1.09

1.63

2"x2"

4 mm

0.27

0.54

0.82

4"x4"

5 mm

0.17

0.34

0.51

4"x4"

10 mm

0.34

0.68

1.02

8"x8"

5 mm

0.09

0.17

0.26

8"x8"

10 mm

0.17

0.34

0.51

12"x12"

5 mm

0.06

0.11

0.17

12"x12"

10 mm

0.11

0.23

0.34

16"x16"

5 mm

0.04

0.09

0.13

16"x16"

10 mm

0.09

0.17

0.26

18"x18"

5 mm

0.04

0.08

0.11

18"x18"

10 mm

0.08

0.15

0.23

20"x20"

5 mm

0.03

0.07

0.10

20"x20"

10 mm

0.07

0.14

0.20

24"x24"

5 mm

0.03

0.06

0.09

24"x24"

10 mm

0.06

0.11

0.17

Tile size

Thickness

Joint width

4 mm

Joint width

5 mm

Joint width

6 mm

1"x1"

4 mm

2.18

2.72

3.26

2"x2"

4 mm

1.09

1.36

1.63

4"x4"

5 mm

0.68

0.85

1.02

4"x4"

10 mm

1.36

1.70

2.04

8"x8"

5 mm

0.34

0.43

0.51

8"x8"

10 mm

0.68

0.85

1.02

12"x12"

5 mm

0.23

0.28

0.34

12"x12"

10 mm

0.45

0.57

0.68

16"x16"

5 mm

0.17

0.21

0.26

16"x16"

10 mm

0.34

0.43

0.51

18"x18"

5 mm

0.15

0.19

0.23

18"x18"

10 mm

0.30

0.38

0.45

20"x20"

5 mm

0.14

0.17

0.20

20"x20"

10 mm

0.27

0.34

0.41

24"x24"

5 mm

0.11

0.14

0.17

24"x24"

10 mm

0.23

0.28

0.34

(roughly 1 inch = 2.5 cm. = 25 mm.)
Waste will occur according to actual field performance including working method, skill, and site condition.
Application steps

MIXING

  • Put Part B (Polymer emulsion) 1 bag in a mixing bucket.

  • Gradually add Part A (SikaTile®-670 TG Pool) 1 bag into the bucket and mix with a power drill until the

    compound is evenly homogeneous, lump-free paste.

  • Leave to stand for several minutes.

  • Do not add any additional water.

     

APPLICATION

  • Allow 24 hours after tilling.

  • Use a rubber float to fill the joint in a diagonal 

    motion.

  • Remove excess grout.

  • Ensure the grout is pressed into the joint and not just sitting on top.

  • Quick clean with a damp sponge.

  • Allow 2 hours before cleaning with a dry cloth.

  • Allow 1 day before foot traffic.

  • Allow 3 - 7 days before filling with water.

CLEANING OF EQUIPMENT

Remove grout from tools, equipment, and tiles with clean water after application.

Documents