Product Data Sheet Show all documents
SikaGrout®-212 GP

SikaGrout®-212 GP

General Purpose Non-Shrink Grout

SikaGrout®-212 GP is a non-shrink, self-levelling, pre-mixed cementitious grouting mortar with extended working time to suit local ambient temperatures.

  • Good flowability
  • Good dimensional stability
  • High strengths, adjustable consistency
  • No bleeding
  • Non toxic, non corrosive
  • Ready and easy to use
  • Economical
  • Impact resistant
Product Data Sheet Show all documents

Usage

SikaGrout®-212 GP is suitable for the following grouting works: columns in precast construction cavities, gaps, recesses, etc.  

Advantages

  • Good flowability
  • Good dimensional stability
  • High strengths, adjustable consistency
  • No bleeding
  • Non toxic, non corrosive
  • Ready and easy to use
  • Economical
  • Impact resistant

Packaging

20 kg / bag

Colour

Powder Grey

Product Details

Product Information

Shelf life

12 months from date of production.

Storage conditions

Keep in unopened, undamaged original packaging and protected from

direct sunshine in dry condition.

Bulk density

Approx. 1.3 kg /L
Technical Information

Compressive strength

Water
Content (%)

1 day

7 days

28 days

13

250

550

730

14

200

500

650

Note: ASTM C109 (kgf / cm2)
          Test at 28°C in lab condition

Application

Application Information

Setting time

Water
Content
(%)

Consistency
(J rote)

Setting Time
(Initial)

Setting Time
(Final)

Bleeding /
ASTM C232

13

<15 seconds

~ 4 : 00

~ 7 : 00

nil

14

<10 seconds

~ 5 : 00

~ 8 : 00

nil

Note: ASTM C807 (hours : minutes) Test at 28°C in lab condition.
Consumption

Consumption

Approx. 2 kg of powder for one litre of mortar.

For 1 m3 of mortar approx. 94 x 20 kg bags and 260 litres of water.

 
Application steps

MIXING

Powder should be added to the pre-gauged water to suit the desired consistency. For J rote <10 seconds, approx. 2.8 lites of water per 1 bag 20 kg. (approx. 14% by weight of SikaGrout®-212 GP) should be used.

 

The amount of water may be reduced within the flowable consistency if desired. Mix mechanically with a low speed drill (max. 500 RPM) with a disc agitator attached, until a smooth, even consistency is achieved.

APPLICATION

Pour mortar after mixing. Ensure, that air entrapped into the grout is allowed to escape. When carrying out baseplate grouting, ensure sufficient head of pressure is maintained to keep mortar flow uninterrupted. Make sure, that necessary formwork is firmly in place and watertight.

CLEANING OF EQUIPMENT

Clean all tools and equipment with water immediately after use. Hardened mortar can only be removed mechanically.

Documents