LANKO 110 Skimcoat White Extra

• LEED v4 and v4.1 BETA
• WELL Building Standard

Hydraulic binder, mineral filler, aggregate and admixtures

12 months from date of production if stored in undamaged and unopened, original sealed packaging

Store in dry condition and protected from direct sunshine

0.85 – 0.95 kg/L

0.3 mm

> 11

> 8 MPa at 28 days

≥ 0.8 MPa at 28 days

0.5 - 2.0 mm

+5°C to +35°C

Approx. 7.5 to 8.5 litre water per bag 20 kg

Approx 120 minutes (at 25°C)

Approx. 300 minutes (at 25°C)

~3 -7 days

Approx. 1.3 kg/m2 per 1 mm thickness

1. Mix LANKO 110 Skimcoat White Extra 20 kg with 7.5 -8.5 litres of water until the product is evenly distributed.
2. Mixing should be carried out as follows: In case of small quantity, use small paddle to mix at least 3 minutes. For big quantity, the machine is recommended with a speed at 500 rpm. Mixing time: at least 3 minutes and required consistency is obtained.
3. Leave to stand for 1 - 3 minutes.
4. Do not add water after mixing

1. Apply the first coat of mixed product with a trowel.
2. Apply a minimum of 2 coats : the first coat is used to level the substrate and the second to finish. More coats can be applied to meet the required thickness or texture.
3. If there are too many porous on the substrate, apply first coat to fill those areas first. Then the other layers will be easier and quicker.
4. Allow a sufficient drying time between the coats for 10 - 45 minutes.
5. Can use sandpaper no.380 to polish the surface.
6. Allow 3 - 7 days before applying covering material.